HB Pro Rc Helicopter Parts

RC Helicopters & Remote Control Helicopters : RC Helicopter Parts

HB Pro Rc Helicopter Parts

These helicopter parts will fit the HB Pro rc helicopter. The parts below are also interchangeable with Blade CP rc helicopters made by E-flite.


	EK4-0000 Main blade EK1-0000A Main motor 370# w/ 9T 0.5M Pinion EK1-0001A Tail Motor w/ 8T 0.5 M Pinion EK1-0101 Battery pack (9.6v Ni-mh) EK1-0180 3 cell-1000mha-Li-polymer EK1-0213 Bearing 362.5 EK1-0216B Vertical fin set EK1-0217 Tail rotor drive gear EK1-0218 Bearing 263 EK1-0219 Tail rotor blade EK1-0221 Training gear sets EK1-0222 Paste/strap EK1-0223 Tail motor heat-sink EK1-0224 Main motor heat-sink EK1-0226 Motor wires EK1-0228 Center hub set EK1-0229 Rotor head set EK1-0231 Paddle control frame (outer) EK1-0232 Flybar EK1-0233 Paddle EK1-0234 Pitch control link set EK1-0235 Swashplate set EK1-0236 Servo push-rod set EK1-0237 Battery hanger set EK1-0238 Main shaft drive gear set EK1-0239 Skid set EK1-0240 Cabin EK1-0241 O ring, Rubber/ Plastic ring EK1-0242 Screws/nuts/washers EK1-0243 Tail boom EK1-0244 Main blade grip set EK1-0245 Ring-like push-rod EK1-0246 Main shaft Retaining Collar EK1-0247 Paddle balance weight EK1-0248 Main frame assembly EK1-0266 Main Axis EK1-0272 servo control EK2-0018 Transmitter Crystal Channel 35 mhz EK2-0048 Transmitter Crystal Channel 40 mhz EK2-0255 Transmitter Crystal Channel 72 mhz EK2-0401 Transmitter 6 CH LCD ccpm (w/trainer) EK2-0402 Mini receiver (w/o crystal) EK2-0500 Servo EK2-0701A 3 in1 Controller EK2-0702A 4 in1 Controller EK2-0851 Charger for 3 cell Li-Polymer battery EK2-0852 Charger for 3.7-14.8 V Li-Poly EK2-0902 Switching adapter (input110-220V, output12-15V) (Europe) EK2-0903 Switching adapter (input110-220V, output12-15V) (USA) EK2-0904 Switching adapter (input110-220V, output12-15V) (UK Parallel cable for HB Pro Transmitter HB PRO Brushless Motor 2800kv 20-40