Hobbico NexSTAR .46 Trainer ARF HCAA2025
This is the radio controlled, glow powered, Almost Ready-to-Fly, Hobbico NexSTAR .46 trainer airplane. For Beginner Modeler/Fliers. ** This version does not include a radio, pilot assist link, engine, ** NexSTAR Simulation Software, and the learn-to-fly guarantee. With such features as SpinControl Airfoil Extensions, SpeedBrakes and Training Flaps no other trainer offers so much help for the first-time pilot.
Features
Hobbico NexSTAR .46 Trainer ARF HCAA2025
Construction: Balsa and plywood
Wings: CenterCore Molded Composite Main Wing Rib maintains perfect alignment and includes a built-in aileron servo mount, wing halves are joined with a steel rod.
Flat bottom high mount configuration
One-piece, all wood precision airfoil with SpinControl Airfoil
Extensions that provide lift even in a stall to keep the
NexSTAR level and the pilot in control.
PivotFlex Wing Mounting System fastens with one 1/4-20x2 nylon wing bolt (GPMQ4402),a rubber retainer and pivoting channel absorb minor jolts of normal use, more severe jolts cause the wing to separate from the fuselage and escape the full force of impact.
Airspeed Restrictor: SpeedBrakes Training Flaps attach to forward section of wing near fuselage and hold airspeed to a minimum to insure smooth landings, removeable as pilot skills increase
Covering: Polyester based heat shrink, color scheme is White and Red with Silver accents. True Red TOPQ0227
Landing Gear: Duraluminum SnapGear Quick Landing Gear Mounts, (US Patent #6,886,780) lock in place with a snap and provide the strongest landing gear of any trainer, also easily removeable
Aileron Control: Requires single standard size servo, wings are built with dual aileron servo trays for future upgrades as skills increase, can also be equipped with flaps
Tail Mounting: EasyAlign System guides parts into place automatically in perfect alignment without tools
Building Time: Ready to fly in 3-5 hours
Warranty Period: Hobbico guarantees this kit free from defects in both material and workmanship at purchase date. This warranty does not cover any component part damaged by use or modification.
Specifications
Wingspan: 68.75" (1746mm)
Wing Area: 722 sq in (46sq dm)
Weight: 6.5lb-6.75lb (2835g-3060g) ready to fly
Wing Loading: 20-21 oz/sq ft (61-66g/sq dm)
Length: 56" (1420mm)
Airfoil: High-Wing
Center of Gravity: 3-3/16" (81mm) forward limit 3-9/16" (90mm) aft limit from the wing's leading edge at the fuselage sides
Control Throws- Elevator: Up & Down �" (13mm) Rudder: Right to Left �" (19mm) Ailerons: Up �" (13mm) Down 3/8" (9mm)
Right Thrust Angle-3�
Down Thrust Angle-4� wing respect to wing incidence
Contents
Pre-built and covered wings, fuselage and tail assemblies, pre-bent main landing gear with three 2�" (70mm) foam main wheels, steerable nose gear, IsoSmooth aluminum and rubber engine mount, 9.1oz (270cc) fuel tank, 2�" (57mm) red plastic spinner pushrods, linkages, and photo-illustrated instructions
Requirements
Radio: 4-channel
Servos: Four standard size (1-throttle, 1-rudder, 1-elevator, 1-elevator)
Engine: .46 cu in (7.5cc) engine (*see comments below)
Model airplane fuel
Building and field equipment
Charging Rx and Tx batteries
Comments
Wings are equipped with dual aileron servo trays if dual aileron servos are desired. If you wish to use flaperons you will need to upgrade your radio system to 6 channels. The instruction manual list parts needed and information to perform these conversions.
The metal straps described on page 13 for the engine mount are not included with the kit.
If a replacement fuel tank is needed, an 8oz (240cc) tank like SULQ1439 can be used. Some minor modification may be needed as this is not the exact shape of the original tank
*Because the .46LA dimensions are different than a bearinged engine, it will not work in this plane unless modifications are made. You will need a different engine mount. Depending on which engine mount is used, you may need to add aprox. 1/4" to 3/8" plywood to the firewall to extend the prop forward enough to keep it from contacting the fuselage.
*If a Tower .46 is being use, you will need to use an muffler extension. The Dubro 699 Muffler Extension DUBG1319 will work fine.
*The steel wing joiner rod used in this model can be substituted with the the rod from the Hobbico AviStar/SuperStar Select(HCAA3722)
?
"What else can I say, but this Magic Cars Hummer is awesome. Bought it for my 1 year old son and he loves it." ... read more