HPI Racing K5.9 Engine 15250

HPI Racing K5.9 Engine 15250

This is the K5.9 Big Block Engine with Pull Starter from HPI.

Features

• HPI Racing K5.9 Engine 15250

• Fits all versions of the current glow powered HPI Savage

• ABC piston and liner construction, "A"luminum piston with "B"rass cylinder liner that is "C"hrome plated

• Three needle composite bodied slide valve carburetor with 9.5mm diameter inlet

• Twelve fin aluminum heat sink cylinder head, gun metal gray in color

• Two year warranty, valid for engines sold and used in the USA,

• Canada and South America

Specifications

• Displacement: .36 cu in (5.9cc)

• Carburetor Settings-

• High Speed Needle: Flush with groove

• Low Speed and Mid Range Needle: Flush with carb body

• Idle Adjustment Screw: Set after high speed needle is adjusted-set high enough to keep engine running smoothly but not engage the clutch or turn the wheels

• Refer to manual for more detailed carburetor setting info

• Height from Crankcase Bottom to top of Cylinder Head: 4.4" (112mm)

• Height/bottom of Mounting Tab to top of Cylinder Head: 3.8" (97.5mm)

• Distance between Mounting Hole Centers Same Side: 0.87" (22mm)

• Distance between Mounting Hole Centers Opposite Side: 1.5" (38mm)

• Length from Starter to end of Crankshaft: 4.4" (112mm)

• Length from Starter to Front Bearing: 3.3" (83mm)

• Width at Mounting Tabs: 1.8" (45mm)

• Diameter of Cooling Head: 2.4" (60mm)
  ?

Contents

• K5.9 Big Block Engine with Pull Starter, silicone exhaust gasket, R5 cold glow plug, foam air filter assembly with zip ties and instruction sheet

Requirements

• Fuel: Car blend with 20-25% nitro content

• Track Equipment: Glow starter, fuel tubing

?