Thunder Tiger 3837-K22 MD-530 Scale w/Titan 50
This is the glow powered, Thunder Tiger Raptor 50 Titan Helicopter Kit with the Pro .50H Engine and the MD-530 Fuselage in Dark Green Paint Scheme.
For Advanced to Expert Helicopter Pilots 14 Year of Age and Older.
Features
Thunder Tiger 3837-K22 MD-530 Scale w/Titan 50
Control System: 90� Collective Cyclic Pitch Mixing with hardened main shaft and push-pull collective pitch and elevator control systems
Autorotation Gear: Constant drive design allows aerobatics during autorotation
Engine: Thunder Tiger Pro .50H ringed with Schnuerle porting and two- needle carburetor
Exhaust: Polished natural finish aluminum
Main Blades: Carbon construction 24.4" (620mm) long
Flapping Damper: Nonlinear for aggressive 3D flying
Tail Drive: Belt type with metal guide pulleys on body and tail
Tail Boom: Aluminum, longer than the Raptor 50 V2 to fit 620mm blades
Body: Fiberglass construction with clear molded windows and dark green military paint scheme
Tail Rotor Blades: White plastic
Vertical Fin: 3D design, constructed of carbon
Aileron and Elevator Linkage: Push-pull
Landing Gear: Nylon with aluminum skids
Fuel Tank: 11.5oz (340cc)
Specifications
Fuselage Length: 48.03" (1220mm)
Fuselage Width: 5.51" (140mm)
Total Height: 15.75" (400mm)
Main Rotor Diameter: 54.53" (1385mm)
Tail Rotor Diameter: 9.33" (237mm)
Gear Ratio: 1:8.5:4.56 standard
1:8.73:4.56 optional
Fully Equipped Weight: 6.6lbs (3000g)
Contents
ARF Thunder Tiger Raptor 50 Titan Helicopter Kit with MD-530 Body, Pro .50H Engine, Exhaust Pipe, Carbon Blades, Landing Gear, Fuel Tank and Instruction Manual
Requirements
Radio: At least 6-channel
Servos: Four standard with one digital rudder servo
Gyro: Heading lock
Flight Battery: 4.8V NiMH, at least 1200mAh
Glow Fuel: Heli blend 15-30% nitro content
Glow Plug: Medium length, medium heat range
Starting Shaft: 6mm hex size
Flight Battery: 4.8V 1200mAh NiMH
Electric Starter: 12V .90 size
Remote Glow Starter
Building and field equipment
Comments
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing
2 8x12mm R& L Elevator Subassembly 1 DTXC1581
2 4x8mm Elevator Push/Pull 1 DTXC1511
4 6x13mm Rotor Shaft 2 DTXC1573
4 5x10mm Tail Rotor Hub 2 DTXC1535
2 4x7mm Tail Pitch Control Lever 2 DTXC1507
4 4x7mm Flybar Assembly 2 DTXC1507
1 5x11mm Tail Idle Pulley 1 DTXC1547
1 4x7mm Pitch Push-Pull Lever 1 DTXC1507
"What else can I say, but this Magic Cars Hummer is awesome. Bought it for my 1 year old son and he loves it." ... read more