Thunder Tiger 9554 PRO .46M Inboard Ring
This is the Thunder Tiger Pro .46M 2-Stroke Inboard Marine Engine.
Features
Thunder Tiger 9554 PRO .46M Inboard Ring
Side exhaust
CNC machined components
ABN piston and sleeve "A"luminum piston, "B"rass cylinder liner that is "N"ickel plated
Water cooled cylinder head, blue in color
Hyperutectic machined Al-Si ringed piston
Dual ball bearing-supported long style SG crankshaft
Two needle carburetor with 9mm bore and oversized throttle lever for easy installation and operation of throttle linkage
Three year limited warranty through Hobby Services beginning at date of purchase
Specifications
Displacement: 0.455 cu in (7.47cc)
Bore: 0.858" (21.8mm)
Stroke: 0.787" (20mm)
Practical RPM: 4,500 - 24,000
Output: 2.46 HP @ 23,000 rpm
Weight: 12.35oz (350g)
Carburetor Settings-NOTE carburetor is preset from the factory and requires only small adjustments
Needle Valve: 3 turns counterclockwise from closed
Mixture Metering Screw: After setting needle valve, set mixture screw flush with the end of the spray bar and then turn upward about two turns
Height from Mounting Tab Bottom/Top of Cylinder Head: 2.7" (70.1mm)
Height from Crankcase Bottom to Top of Cylinder Head: 3.5" (88mm)
Width at Mounting Tabs: 1.9" (50mm)
Width of Crankcase below Mounting Tabs: 1.3" (33mm)
Center of Mounting Holes Same Side: 0.71" (18mm)
Center of Mounting Holes Opposite Side: 1.6" (42.9mm)
Center of Crankcase to Front Bearing: 2.04" (51.7mm)
Distance from Backplate to Front Bearing: 3.01" (76.4mm)
Package Contents
Thunder Tiger Pro .46M Marine Engine with carburetor, R2 long reach glow plug, 2.5mm hex wrench, decals and instruction manual
Requirements
Fuel: 20% lubricant and 10-40% nitro content, synthetic/castor blend lubricant recommended (do not use more than 10% nitro content for break in) Glow starter, plug wrench and shore equipment
Comments
N/A.
"What else can I say, but this Magic Cars Hummer is awesome. Bought it for my 1 year old son and he loves it." ... read more